Posts

Why FFP2 Protective Masks Are Better Than Regular Medicinal Masks

The FFP2 protective mask is heavily underutilized in the fight against widespread diseases like Coronaviruses. While the traditional medicinal masks are efficient, they are no way near the protection levels offered by FFP2 face masks.

The Difference Between a Medical Mask and an en149 FFP2 Protective Mask

EN149 FFP2 dust protective face masks are meant to offer protection against airborne particles but can also block droplets that can carry pathogens. Regular medicinal masks only protect against droplets. Many viruses get transmitted from one person to another via droplets that travel through the air. Medicinal masks can block these droplets when the contamination source is in front of the person wearing the mask. On the sides, medicinal masks do not sit tightly over the face, leaving some gaps that can allow droplets to pass through and inhales.

This issue that medicinal masks have is not valid for FFP2 masks. Due to their design, they fit better and provide better insulation against exterior contaminants. Depending on the quality of the mask, it can filter at least 94% of airborne particles. They are usually blue or white and have the same elastic straps on the sides to ensure a tight fit.

Comparing the two, FFP2 face mask are undoubtedly better at protecting individuals from different types of pathogens, pollutants, airborne particles, and even some gases.

The Misconception

A lot of people seem to think that FFP2 masks can make breathing difficult, even more so than traditional medicinal masks. Even though there have been numerous social media influencers that ran for great distances with a mask on just to prove that they are safe to use, there is still some resistance from the majority of the population when it comes to wearing them over longer periods.

FFP2 protective masks have several features that are meant to make it easier to breathe with them. They usually have an exhalation valve that allows the warm and humid air exhaled by the wearer to escape the mask. This valve reduces the moisture inside the mask, avoids condensation, and prevents the mask from becoming less permeable. Because these masks are made from thicker materials that block microscopic organisms and particles, these valves and filters are mandatory. Without them, breathing with such a mask will become very difficult.

Using FFP2 Face Masks Properly

An EN149 FFP2 NR mask is efficient only if it is used correctly. Yes, it is possible to make some minor mistakes that severely decrease their capacity to block harmful particles and organisms. The first thing to look at is the metal tab around the mask that can be adjusted to fit better onto the bridge of the nose. When a mask is put on, the metal tab needs to be properly adjusted to ensure proper insulation.

Another problem is facial hair. A beard can cause the mask to sit improperly and allow for gaps between the skin and the mask to appear which in turn allows small particles to get inside.

Lastly, the hands need to be properly washed right before putting the mask on. When taking the mask off, the wearer’s hands need to be immediately washed and avoid touching any other objects.

What Is The Difference Between FFP1 VS FFP2 VS FFP3

The EN149 face mask respirator is classified as “FFP1,” “FFP2” or FFP3 face masks or respirators, indicating its ability to filter out microparticles, viruses, suspended particles, and other particles, as well as facial features. FFPs stand for “Filtering of fine particles”. The respirators, which range from FFP1 to FFP2 to FFP3, offer respiratory protection against different concentrations of pollutants depending on the size of the particles (particles from 0.6 mm to 1.5 mm).

The rule for the three classifications of FFP masks is that the higher the number, the better the protection, meaning that “FFP3” provides the greatest protection of all three. Each of the antivirus masks offered can filter out the capacity of the particles in the air, which they can hold back depending on the degree of protection. The FFP masks have different capabilities and will work by filtering out certain pollutants from the air.

TYPE  FILTERING PENETRATION LIMITTOTAL LEAKAGE
FFP1  Filters at least 80% of air particles21%
FFP2  Filters at least 94% of air particles9%
FFP3Filters at least 99% of air particles    2%  

FFP FACE MASK

The FFP (filtering facepiece) filter mask also known as a respirator is a European Union-certified protective mask that protects the face, nose, mouth, throat, and respiratory organs against particles such as dust, dust particles, air particles or particles from bacteria. There are three types of FFP mask depending on the filtering efficiency. These include the following: Ffp1, FFP2, and FFP3, all of which can be selected when used for respiratory protection. The face Piece mask can also be filtered through a variety of other filters such as air filters, air purifiers, or air purifiers.

FFP1 FACE MASK

The FFP1 classification of respirators is designed for working environments where toxic fibrous dust particles and aerosols are expected in the air. The FFP1 protective mask filters particles up to 0.6 micrometers in size and 1 micrometer in diameter, as well as particles larger than 2 micrometers. The FFP1 face mask filters at least 80% of the particles. It has a limited filtering effect and only filters large particles. FFP1 is not good enough to protect the wearer from harmful microparticles carrying viruses

FFP2 MASK RESPIRATOR

The standard FFP2 face mask also known as a liquid-resistant surgical mask designed to protect against injection drops that hit the wearer’s nose, mouth, and airway. It is extremely comfortable to wear and protects even after long use and is used as a disposable mask. FFP2 protective mask is used to protect the face, nose, mouth, and airways as well as throat.

This face mask covers the mouth and nose and is typically made up of various filter materials that support the filtration of air in this particular mask. The FFP2 dust mask contains various certification features that may be included when filtering air pollutants from the air

nor

The FFP2 comes in a wide range of different shapes, sizes, and colors, as well as in many different styles. The FFP2 mask respirator can be used in different environments, including cold, wet, as well as hot and dry environments. The respirator also protects those who wear it from inhaling droplets of infectious agents

It should be noted that this type of mask must be used in combination with other PPE measures. The foldable FFP2 respirator valve is offered by manufacturers and suppliers of air filter masks. FFP2 face masks are equipped with a valve to improve user comfort. This valve helps the user to breathe easily and prevents condensation on the mask by fogging the glass. The standard FFP2 surgical mask is effective in preventing respiratory diseases e.g. COVID-9.

The standard FFP2 face mask protects the wearer from inhaling droplets and airborne particles. It is designed to prevent the excretion of secretions from the upper airways and saliva, which can contain particles such as dust, dust particles, air particles, or particles from bacteria and viruses when exhaled. Due to its filter efficiency and its usability, it is considered as one of the most efficient filter masks in its class.

FFP3 FACE MASK

In high-risk areas where surgical masks do not provide sufficient protection, an FFP3 mask respirator with a valve would be recommended. The FFP3 series respirator is extremely durable, features a preformed bridge of the nose, and an excellent fit that provides easy access to nostrils with excellent ventilation.

When we talk about the FFP3 face mask, it is a reusable mask, typically made of non-woven synthetic fiber, and features a high-performance exhalation valve that is used to change the filter layer by screwing in. This type of FFP protective mask provides its users with many important specifications and protection features when worn in a compromised environment.

FFP3 is also designed to protect against spray drops that hit the wearer’s nose, mouth, and airway. The report examines the effectiveness of the FFP3 face mask in reducing the spread of droplets in the air and their effectiveness in preventing infection.

In this way, the FFP3 mask is designed to allow the user to breathe through the airways, providing a safe and comfortable environment for both the wearers. It helps to avoid any secretions in the upper airways or saliva that are present during exhalation and inhalation of the carrier, such as mucus.

A standard surgical mask is one of the most effective ways to prevent infections among health care workers.  The ability of the filter mask FFP3 to filter out microparticles and viruses is greater than that of the mask FFP2. This respirator filters 99% of the particles, which means that it provides the greatest protection. This mask can also prevent infection in patients with respiratory diseases such as asthma, bronchitis, and respiratory infections. FFP3 protects against fine particles, for example, asbestos. It doesn’t protect against gases and specifically nitrogen oxide

Conclusion: Hospitals and medical staff are protected by masks and respirators in the event of an emergency such as a heart attack, stroke, respiratory arrest, or other serious illness. You should wear a mask to protect your lungs from all the dangerous things in the air. These could be particles, dust, aerosols, or smoke which may reduce the amount of blood flow to the lungs and other body parts such as the brain, heart, and lungs.